PRODUCT
INFORMATION

BROCHURE

CCMC

ICC




   

SUPERPRO Dimpled Membranes are extremely durable, inexpensive and easy to use waterproofing membrane. It is for use with SUPERPRO It is manufactured to the largest and widest variety of roll sizes, worldwide
SUERPRO Dimpled Membrane
SUPERPRO Dimpled membrane For ICF's

 

SUPERPRO Dimpled Membranes PERMANENT BARRIER BRIDGES WALL CRACKS

SUPERPRO Dimpled Membrane is made from tough, long lasting plastic that keeps exterior moisture out. It prevents backfill material from touching the foundation wall and bridges typical wall cracks with ease.

 

SUPERPRO Dimpled Membranes DRAINAGE SPACE

The dimples in the membrane create a drainage space that allows the wall to breathe. It keeps 100% of the headwater pressure off the face of the wall. This space allows moisture to condensate outward on to the membrane. By gravity, the moisture then falls to the footing drain for removal.

3 Easy Steps to a Dry Basement


 

SUPERPRO Dimpled Membranes keep mud, dirt and water away from your foundation.The drainage space adds a 2nd line of defense.

 

Standard Fastening System
(Most economical material cost system)

Requires Membrane Cap for edges and SuperPlug fastened 8" OC.

1 Roll of membrane requires approx:

  • 2 bundles of Membrane Cap
  • 2-3 bags SuperPlugs
SUPERPRO Standard Fastening System

DimpleGrip Fastening System (Premium system, preferred for ICF's)

Requires DimpleGrip Molding for horizontal edges, SuperPlugs fastened 16" OC and Membrane Cap for vertical and sloping areas. Small plugs can be used to fasten corners and body of the membrane.

1 Roll of membrane requires approx:

  • 2 Bundles of DimpleGrip
  • 2-3 bags SuperPlugs
  • Membrane Cap as required
SUPERPRO Super Plug Fastening System

 



Tested and Passes the Following
CGSB, CCMC# 13098-R, 13099-R, ICC EG114, NBC 9.13.3, 9.14.2.1 & IRC R405, R406
SPECIFICATIONS
Dimpled Sheet
High Density Polyethylene (HDPE)
Available Colors
Black (standard), Brown, Clear
Compressive Strength
5200 psf (250 kN/m² )
Dimple Height
5/16" (8mm)
Fire Rating
B2 (DIN 4102)
 



Privacy Policy | Be a Certified Installer | Contact Us |